What the government is buying
Department of the Army (W6QM Micc-Ft Drum) has posted a combined synopsis/solicitation notice on SAM.gov for Thermal Arc Sound Attenuation Booth under solicitation number W911S227U0010. Responses are due October 13, 2026, 12:00 PM CDT. The notice lists a set-aside of Total Small Business.
From the notice: Thermal Arc Booth Salient Characteristics MCAAP Engineering will verify and validate the proposal from the vendor prior to award.Scope: Thermal Arc Sound Attenuation Booth. Includes all necessary parts and hardware for a completely erected (in 2 halves) Thermal Arc Booth.Item/Model #: QT100118128TA or similar. 1 EAProduct Description:77.5-inch x 102.5-inch x 116-inch Booth.Includes all necessary parts and hardware for a completely erected (in 2 halves) Thermal Arc Booth.18ga galvanized flat panel construction with single slope style roof. Rockwool insulation enclosed in between the 3-inch-deep exterior wall panel and the galvanized, perforated interior liner. Unit is to be assembled and shipped with doors loose. Door hardware and switches included.All onsite installation, mounting ...
| Title | Thermal Arc Sound Attenuation Booth |
|---|---|
| Agency | Department of the Army |
| Office | W6QM Micc-Ft Drum |
| Solicitation number | W911S227U0010 |
| Notice type | Combined Synopsis/Solicitation |
| Set-aside | Total Small Business |
| NAICS | 332322 |
| PSC | 5410 (Federal Supply Group 54: Prefabricated Structures and Scaffolding) |
| Place of performance | 74501 |
| Response due | October 13, 2026, 12:00 PM CDT |
| Point of contact | Eric Markland, eric.w.markland.civ@army.mil |
| SAM.gov notice | https://sam.gov/opp/7cd63ab28d81478da9657df7686d6e35/view |
This page summarizes the public notice only. The complete solicitation, amendments, and attachments are posted on SAM.gov, and offerors should price from the full package.
How Wexmar would machine this
Based on the notice title and classification, Wexmar would plan this work around turning, horizontal milling, or Swiss turning depending on the geometry on the drawing, with the process set so critical features are cut in the fewest setups. Every lot is inspected against the drawing on Brown & Sharpe CMMs.
Equipment on the floor
- Turning: 10 Mazak and Doosan CNC lathes with live tooling
- Horizontal milling: 6 Mazak horizontal machining centers, 3- and 4-axis, with pallet changers
- Swiss: 4 Maier Swiss-type lathes, bar capacity to 32 mm
- Grinding: centerless and surface grinding
- Inspection: 2 Brown & Sharpe coordinate measuring machines
Materials
Material is set by the drawing. Wexmar machines carbon and alloy steels, stainless steels including precipitation-hardening grades, Inconel, Monel, Hastelloy, aluminum, brass, bronze, titanium, and engineering plastics, and buys bar and plate with mill certifications. Where DFARS 252.225-7009 applies, specialty metals are sourced from qualifying melt sources and the certifications travel with the parts.
Finishing and heat treatment
If the drawing calls for plating, anodizing, passivation, or heat treatment, Wexmar manages those steps through qualified outside processors and includes their certifications in the lot paperwork.
Documentation and registration
- First article inspection reports and CMM dimensional reports
- Material certifications traceable to heat lot, and certificates of conformance
- DFARS 252.225-7009 specialty metals sourcing
- ISO 9001-aligned quality system
- SAM.gov active, CAGE 16AD7, small business, woman-owned small business (WOSB)
Working with a prime or distributor
If your company is responding to W911S227U0010, Wexmar can price the machined content against the drawing revision and quantities in the notice, quote first article and production lots as separate lines when the notice separates them, and ship to you or directly to the government destination.
Send us the files
We can build this. Send us the files. Primes, integrators, and buyers: send the drawing package and quantity and Wexmar will quote it as your subcontractor or direct supplier. Upload a PDF or STEP for an instant estimate, email ron@backwell.com, or call (315) 400-2654.
Related: Build-to-print machining, Government and defense machining, DFARS specialty metals sourcing, Defense and DoD machining.