CNC Machining by Material
Wexmar machines turned, milled, and Swiss parts in Canastota, NY and ships nationwide. Choose a topic for tolerances, materials, process fit, and pricing guidance.
6061-T6 Aluminum CNC Machining
6061 aluminum CNC machining in Canastota, NY: turning, horizontal milling and Swiss work in 6061-T6, with typical tolerances, finishes, and cost comparisons.
7075-T6 Aluminum CNC Machining
7075 aluminum CNC machining for high-strength parts: 7075-T6 and T7351 turning and horizontal milling in Central New York, with finish and cost guidance.
2024-T351 Aluminum CNC Machining
2024 aluminum CNC machining for fatigue-critical parts: 2024-T351 turning, Swiss and horizontal milling in Canastota, NY, with finish and cost guidance.
5052-H32 Aluminum CNC Machining
5052 aluminum CNC machining for marine and enclosure parts: 5052-H32 plate milling and turning in Central New York, with tooling notes, finishes and costs.
MIC-6 Cast Aluminum Tooling Plate Machining
MIC-6 aluminum machining for flat, stable plates: cast tooling plate milled on horizontal machining centers in Canastota, NY, with finishes and cost notes.
303 Stainless Steel CNC Machining
303 stainless CNC machining for fittings, shafts and pins: free-machining 303 turned and Swiss machined in Canastota, NY, with passivation and cost notes.
304 and 304L Stainless Steel CNC Machining
304 stainless CNC machining: 304 and 304L turning, horizontal milling and Swiss work in Central New York, with work-hardening tips, finish options and costs.
316 and 316L Stainless Steel CNC Machining
316 and 316L stainless steel CNC machining in Canastota, NY. Turned, Swiss and horizontal-milled parts with typical tolerances, finishes and cost guidance.
17-4 PH Stainless Steel CNC Machining
17-4 PH stainless CNC machining in Condition A, H900, H1025 and H1150. Turned, Swiss and horizontal-milled parts from Canastota, NY with full traceability.
15-5 PH Stainless Steel CNC Machining
15-5 PH stainless steel CNC machining for aerospace, valve and defense parts. Typical tolerances, aging conditions, finishing and cost guidance from Wexmar.
410 Stainless Steel CNC Machining
410 stainless steel CNC machining for valve trim, pump shafts and fasteners. Annealed or hardened, with typical tolerances, finishes and cost data from Wexmar.
440C Stainless Steel CNC Machining
440C stainless steel CNC machining for bearing races, valve balls, pins and wear parts. Machined annealed, hardened outside, ground in-house. Canastota, NY.
Nitronic 50 (XM-19) CNC Machining
Nitronic 50 (XM-19) CNC machining for marine shafts, valve stems and pump parts. Typical tolerances, tooling practice and cost guidance from Wexmar, NY.
1018 Cold-Drawn Steel CNC Machining
1018 steel CNC machining for shafts, pins, spacers and fixtures. Turned, Swiss and horizontal-milled parts with plating and case hardening options. Wexmar.
1045 Steel CNC Machining
1045 steel CNC machining in Canastota, NY: medium carbon shafts, pins and gear blanks machined to print, with induction hardening through outside processors.
4140 Steel CNC Machining
4140 steel CNC machining in annealed or prehard 28-32 HRC bar. Turned and horizontally milled chrome moly parts from Canastota, NY, with heat-lot traceability.
4340 Steel CNC Machining
4340 steel CNC machining for high strength shafts and defense parts. Annealed or prehard bar, heat treat and plating through outside processors. Canastota NY.
A2, D2 and O1 Tool Steel CNC Machining
A2, D2 and O1 tool steel CNC machining for punches, die inserts and wear plates. Machined annealed, hardened outside, then ground in-house in Canastota NY.
S7 and H13 Tool Steel CNC Machining
S7 and H13 tool steel CNC machining for punches, die casting inserts and hot work tooling. Machined annealed or prehard, heat treat outside. Canastota NY.
C360 Brass CNC Machining
C360 free-cutting brass CNC machining for fittings, connector pins, valve stems, contacts. Swiss and lathe production with plating through outside processors.
C260 Cartridge Brass CNC Machining
C260 cartridge brass CNC machining for ferrules, sleeves, terminals and parts that are crimped or flared after machining. Turned and milled in Canastota, NY.
C932 and C954 Bronze CNC Machining
Bronze CNC machining in C932 bearing bronze and C954 aluminum bronze. Bushings, wear plates and valve parts turned and milled by Wexmar in Canastota, NY.
C110 Copper CNC Machining
C110 copper CNC machining for bus bars, electrical contacts, terminals and heat sinks. Turned, milled and Swiss-machined in Canastota, New York by Wexmar.
Ti-6Al-4V Titanium CNC Machining
Ti-6Al-4V titanium CNC machining for aerospace, defense, medical hardware and industrial parts. Grade 5 turning, milling and Swiss work in Canastota, NY.
Commercially Pure Grade 2 Titanium CNC Machining
CP Grade 2 titanium CNC machining for chemical, marine and medical hardware. Turned, milled and Swiss-machined commercially pure titanium from Canastota, NY.
Inconel 625 CNC Machining
Inconel 625 CNC machining for valves, fittings, marine and chemical-service parts. Nickel alloy turning, milling and Swiss work from Wexmar in Canastota, NY.
Inconel 718 CNC Machining
Inconel 718 CNC machining in annealed and aged conditions. Precision turned, milled and Swiss-machined nickel superalloy parts from Wexmar in Canastota, NY.
Monel 400 and K500 CNC Machining
Monel 400 and K500 CNC machining for pump shafts, valves, fasteners and marine hardware. Nickel-copper alloy parts turned and milled by Wexmar, Canastota, NY.
Hastelloy C276 CNC Machining
Hastelloy C276 CNC machining in Canastota, NY. Turned, Swiss and horizontal-milled nickel alloy parts with mill certs, CMM reports and heat-lot traceability.
Kovar and Invar 36 CNC Machining
Kovar and Invar 36 CNC machining for hermetic packages, optics and metrology. Swiss, turned and milled controlled-expansion alloy parts from Canastota, NY.
Delrin and Acetal CNC Machining
Delrin and acetal CNC machining for gears, bushings, rollers and insulators. Turned, Swiss and horizontal-milled POM parts from Wexmar in Central New York.
PEEK CNC Machining
PEEK CNC machining for seals, valve seats, bushings and insulators. Unfilled, glass and carbon-filled PEEK turned, Swiss and milled in Canastota, New York.
Nylon 6/6 CNC Machining
Nylon 6/6 CNC machining for gears, rollers, wear pads and insulators. Extruded, cast and filled nylon parts turned and milled by Wexmar in Canastota, NY.
UHMW and PTFE CNC Machining
UHMW and PTFE CNC machining for wear strips, star wheels, seals, valve seats and insulators. Low-friction plastic parts from Wexmar in Canastota, New York.
Ultem and Polycarbonate CNC Machining
Ultem (PEI) and polycarbonate CNC machining for manifolds, insulators, test fixtures and clear guards. Turned and milled plastic parts from Canastota, NY.
Send drawings, get a quote
Email a print, STEP file, or solicitation package. Quotes include material, machine time, finishing, inspection, and freight to your dock.